UHU plus endfest 300kg - feeder

Instructions for use:
The glued parts must be clean, dry and degreased. Extrude filler and hardener in a ratio of 1:1 (two equal strips) and mix properly - the workability of the glue is 2 hours at room temperature. Apply the glue on one side, for rough and porous materials on both sides, press both surfaces together and fix them (using clamps or tape). Curing time and final functional strength depend on the applied temperature - see table. The minimum working temperature is 15 ^o C. Store in a dry and cool place.

Important information:
Keep out of reach of children. In case of eye contact, immediately rinse thoroughly with water and seek medical attention. In case of skin contact, immediately wash thoroughly with plenty of soap and water. If swallowed, do not induce vomiting and seek medical attention immediately. Use suitable protective gloves and goggles. Do not pour down the drain.
Filler: contains epoxy resin Hardener: contains amines

Pictograms:
Xi – irritating
N – dangerous for the environment
Do not pour into the sewer, dispose of this material and its packaging at the special or hazardous waste collection point. Cured glue is environmentally neutral. When used appropriately, the product is harmless to the user and the environment.